#American megatrends bios update f9 code
#American megatrends bios update f9 Pc
#American megatrends bios update f9 download

Today is Sunday and you will not have any help from Intel's engineers, however I hope tomorrow you will have some help from Intel agent.īy the way, I asked you to attach an image of Power Boot Menu. I have not any idea what can be wrong and why you can't recover your bios. To me it is very strange and unusual solution, which will cause a some limitation for users.

#American megatrends bios update f9 Pc

This is unusual solution for NUC and other PC I know. Now, I saw that the memory in your NUC is soldered. I was trying to help you using my experience from other NUCs. As you understand I'm not an Intel employee and I have even not seen NUC8i3CYSM. In the begging of this post I would like to apologize for sending you wrong instructions about the RAM memory. Memory Multiplier - (no longer user definable) If bios was successfully updated enter bios and reset the memory settings to default: Reboot computer (with the USB containing bios file inserted) and press F7 for bios update.ģ. Save changes and Reboot (press F10 and confirm with 'Y').Ģ. If not, reduce this multiplier even more ) Memory Multiplier - 18 (check if your memory is underclocked to 2133MHz or 2400MHz. In order to underclocking your memory, enter Bios settings:Īdvanced > Performance > Memory > General Settings This helped in similar case in NUC8i7HVK.

Also, use only 1 DIMM (remove the second DIMM if you have 2 DIMMs installed). Try underclocking the memory to 2133MHz or 2400MHz. Can you attach the image of the Power Button Menu? May be the problem is caused by the preproduction bios loaded in your NUC.ġ. It is very strange to me that you can reach the Power Button Menu, but the F4 option not exists there. the process start automatically and you will see after some 30 seconds the progress on your monitor. If valid bios file is found on USB stick. While recovering Bios with Security Jumper removed, you don't need press F4 to start Bios recovery. If for some reason you have difficulty to boot into Power Button Menu, you may recover your Bios using Security Jumper method

If before update, you have customized bios settings, you can enter again to Bios setting to change the necessary settings.

Press F10 (followed by 'Y'), to save the settings and exit to O.S.

Press F9(followed by 'Y'), to set Bios to default settings.

Enter Bios setting by pressing F2 during boot process.

Replace the power cord and press Power Button to switch the computer to ON.

When the recovery finishes, pull out the power cord.

Press F4 and the recovery shall start (it can take up to 30 seconds for messages to appear on the screen).

If you see the LED color change or you hear the beeps, release the Power Button - NUC shall reboot into Power Button Menu. Alternately, the system will emit three short beeps from the PC speaker or headphones, if connected, then stop. You should release the Power Button soon as the power led changes color from blue to amber.

Press Power Button for about 3 seconds.

#American megatrends bios update f9 download

Save the Bios file CY0036.bio ( Download BIOS Update ) on this stick and insert it into USB slot (NUC shall be OFF). Format your USB on Windows machine (rather than Linux or MAC).

Prepare USB stick fully formatted to FAT32 (disable quick format option during format).

#American megatrends bios update f9 code

Code 92 load vga bios.The easiest is to recover bios from Power Button Menu: